Compact 360 Flanged Fire Brigade Inlet Assembly

COMPACT 360 assemblies combine isolation, delivery and drainage components for connection to the fire-protection network. The main shut-off gate valve (unpainted), heavy-duty PN20, has a position indicator that can be padlocked fully open in accordance with UNI 11443, and a GAS ISO 228 threaded, PN16 flanged or grooved connection. The DN70 inlets have UNI 804 female swivel couplings, complete with automatic isolating valves and UNI 810 male threaded caps operated with the dedicated UNI 814 operating key. The special spring-loaded check valve allows the COMPACT 360 to be installed in any position, including vertically. The whole assembly can also be oriented in any direction, or the individual DN70 outlets can be positioned offset from one another, using standard stainless-steel fasteners. At the end of the COMPACT 360 assembly is a technical cap with a pressure relief valve set to 12 bar and dischargeable through the threaded connection. For complete drainage, an automatic valve is also provided and can be oriented to suit the installation. The entire system can be inspected and its components replaced.

COMPACT 360 assemblies combine isolation, delivery and drainage components for connection to the fire-protection network. The main shut-off gate valve (unpainted), heavy-duty PN20, has a position indicator that can be padlocked fully open in accordance with UNI 11443, and a GAS ISO 228 threaded, PN16 flanged or grooved connection. The DN70 inlets have UNI 804 female swivel couplings, complete with automatic isolating valves and UNI 810 male threaded caps operated with the dedicated UNI 814 operating key. The special spring-loaded check valve allows the COMPACT 360 to be installed in any position, including vertically. The whole assembly can also be oriented in any direction, or the individual DN70 outlets can be positioned offset from one another, using standard stainless-steel fasteners. At the end of the COMPACT 360 assembly is a technical cap with a pressure relief valve set to 12 bar and dischargeable through the threaded connection. For complete drainage, an automatic valve is also provided and can be oriented to suit the installation. The entire system can be inspected and its components replaced.

COMPACT 360 assemblies combine isolation, delivery and drainage components for connection to the fire-protection network. The main shut-off gate valve (unpainted), heavy-duty PN20, has a position indicator that can be padlocked fully open in accordance with UNI 11443, and a GAS ISO 228 threaded, PN16 flanged or grooved connection. The DN70 inlets have UNI 804 female swivel couplings, complete with automatic isolating valves and UNI 810 male threaded caps operated with the dedicated UNI 814 operating key. The special spring-loaded check valve allows the COMPACT 360 to be installed in any position, including vertically. The whole assembly can also be oriented in any direction, or the individual DN70 outlets can be positioned offset from one another, using standard stainless-steel fasteners. At the end of the COMPACT 360 assembly is a technical cap with a pressure relief valve set to 12 bar and dischargeable through the threaded connection. For complete drainage, an automatic valve is also provided and can be oriented to suit the installation. The entire system can be inspected and its components replaced.

COMPACT 360 assemblies combine isolation, delivery and drainage components for connection to the fire-protection network. The main shut-off gate valve (unpainted), heavy-duty PN20, has a position indicator that can be padlocked fully open in accordance with UNI 11443, and a GAS ISO 228 threaded, PN16 flanged or grooved connection. The DN70 inlets have UNI 804 female swivel couplings, complete with automatic isolating valves and UNI 810 male threaded caps operated with the dedicated UNI 814 operating key. The special spring-loaded check valve allows the COMPACT 360 to be installed in any position, including vertically. The whole assembly can also be oriented in any direction, or the individual DN70 outlets can be positioned offset from one another, using standard stainless-steel fasteners. At the end of the COMPACT 360 assembly is a technical cap with a pressure relief valve set to 12 bar and dischargeable through the threaded connection. For complete drainage, an automatic valve is also provided and can be oriented to suit the installation. The entire system can be inspected and its components replaced.

COMPACT 360 assemblies combine isolation, delivery and drainage components for connection to the fire-protection network. The main shut-off gate valve (unpainted), heavy-duty PN20, has a position indicator that can be padlocked fully open in accordance with UNI 11443, and a GAS ISO 228 threaded, PN16 flanged or grooved connection. The DN70 inlets have UNI 804 female swivel couplings, complete with automatic isolating valves and UNI 810 male threaded caps operated with the dedicated UNI 814 operating key. The special spring-loaded check valve allows the COMPACT 360 to be installed in any position, including vertically. The whole assembly can also be oriented in any direction, or the individual DN70 outlets can be positioned offset from one another, using standard stainless-steel fasteners. At the end of the COMPACT 360 assembly is a technical cap with a pressure relief valve set to 12 bar and dischargeable through the threaded connection. For complete drainage, an automatic valve is also provided and can be oriented to suit the installation. The entire system can be inspected and its components replaced.

COMPACT 360 assemblies combine isolation, delivery and drainage components for connection to the fire-protection network. The main shut-off gate valve (unpainted), heavy-duty PN20, has a position indicator that can be padlocked fully open in accordance with UNI 11443, and a GAS ISO 228 threaded, PN16 flanged or grooved connection. The DN70 inlets have UNI 804 female swivel couplings, complete with automatic isolating valves and UNI 810 male threaded caps operated with the dedicated UNI 814 operating key. The special spring-loaded check valve allows the COMPACT 360 to be installed in any position, including vertically. The whole assembly can also be oriented in any direction, or the individual DN70 outlets can be positioned offset from one another, using standard stainless-steel fasteners. At the end of the COMPACT 360 assembly is a technical cap with a pressure relief valve set to 12 bar and dischargeable through the threaded connection. For complete drainage, an automatic valve is also provided and can be oriented to suit the installation. The entire system can be inspected and its components replaced.