Product
Airone DN45 Indoor/Outdoor Wall Hydrant with Panel 0497/CPR/134
Product description
WITH PANEL 0497/CPR/134 UNI EN 671-2 Type 2, “C” shape, complete with:
- Wall-mounted cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with breakable “Integra” panel, complete with instructions for use and handle with seal, opening to over 170°. Available in the following versions:
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel
Standard DN45 cabinet contents
- Flexible DN45 hose certified to EN 14540, available in 15, 20, 25 or 30 m lengths, with UNI 804 aluminium-alloy couplings and binding to UNI 7422 using rubber hose-covering sleeves.
- Red plastic hose support.
- 1½″ hydrant valve with threading compliant with ISO 7-1.
- Adjustable-pattern nozzle, available as Miami Ø 13 mm K 85, Mistral Ø 12 mm K 72 or Mistral Ø 13 mm K 85.
- Assembly instructions, CE mark identification label and seal.
Variants
Select up to four variants to compare their specifications.
€179.00
- Description
Type 2, Form "C", complete with:
- Wall-mounted cabinet made of electro-galvanized steel finished in red RAL 3000 with polyester resin, in accordance with ISO 9227 corrosion-resistant, door opening more than 170°, wasp-proof ventilation slots and provision for an opening.
- butterfly opening mechanism with provision for a seal.
- Shatterproof panel "INTEGRA" trasparente, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
€194.00
- Description
Type 2, Form "C", complete with:
- Wall-mounted cabinet made of electro-galvanized steel finished in red RAL 3000 with polyester resin, in accordance with ISO 9227 corrosion-resistant, door opening more than 170°, wasp-proof ventilation slots and provision for an opening.
- butterfly opening mechanism with provision for a seal.
- Shatterproof panel "INTEGRA" trasparente, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€208.00
- Description
Type 2, Form "C", complete with:
- Wall-mounted cabinet made of electro-galvanized steel finished in red RAL 3000 with polyester resin, in accordance with ISO 9227 corrosion-resistant, door opening more than 170°, wasp-proof ventilation slots and provision for an opening.
- butterfly opening mechanism with provision for a seal.
- Shatterproof panel "INTEGRA" trasparente, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€224.00
- Description
Type 2, Form "C", complete with:
- Wall-mounted cabinet made of electro-galvanized steel finished in red RAL 3000 with polyester resin, in accordance with ISO 9227 corrosion-resistant, door opening more than 170°, wasp-proof ventilation slots and provision for an opening.
- butterfly opening mechanism with provision for a seal.
- Shatterproof panel "INTEGRA" trasparente, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€166.00
- Description
Type 2, Form "C", complete with:
- Wall-mounted cabinet made of electro-galvanized steel finished in red RAL 3000 with polyester resin, in accordance with ISO 9227 corrosion-resistant, door opening more than 170°, wasp-proof ventilation slots and provision for an opening.
- butterfly opening mechanism with provision for a seal.
- Shatterproof panel "INTEGRA" trasparente, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€183.00
- Description
Type 2, Form "C", complete with:
- Wall-mounted cabinet made of electro-galvanized steel finished in red RAL 3000 with polyester resin, in accordance with ISO 9227 corrosion-resistant, door opening more than 170°, wasp-proof ventilation slots and provision for an opening.
- butterfly opening mechanism with provision for a seal.
- Shatterproof panel "INTEGRA" trasparente, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€198.00
- Description
Type 2, Form "C", complete with:
- Wall-mounted cabinet made of electro-galvanized steel finished in red RAL 3000 with polyester resin, in accordance with ISO 9227 corrosion-resistant, door opening more than 170°, wasp-proof ventilation slots and provision for an opening.
- butterfly opening mechanism with provision for a seal.
- Shatterproof panel "INTEGRA" trasparente, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€213.00
- Description
Type 2, Form "C", complete with:
- Wall-mounted cabinet made of electro-galvanized steel finished in red RAL 3000 with polyester resin, in accordance with ISO 9227 corrosion-resistant, door opening more than 170°, wasp-proof ventilation slots and provision for an opening.
- butterfly opening mechanism with provision for a seal.
- Shatterproof panel "INTEGRA" trasparente, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€179.00
- Description
Type 2, Form "C", complete with:
- Wall-mounted cabinet made of electro-galvanized steel finished in red RAL 3000 with polyester resin, in accordance with ISO 9227 corrosion-resistant, door opening more than 170°, wasp-proof ventilation slots and provision for an opening.
- butterfly opening mechanism with provision for a seal.
- Shatterproof panel "INTEGRA" trasparente, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€194.00
- Description
Type 2, Form "C", complete with:
- Wall-mounted cabinet made of electro-galvanized steel finished in red RAL 3000 with polyester resin, in accordance with ISO 9227 corrosion-resistant, door opening more than 170°, wasp-proof ventilation slots and provision for an opening.
- butterfly opening mechanism with provision for a seal.
- Shatterproof panel "INTEGRA" trasparente, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€209.00
- Description
Type 2, Form "C", complete with:
- Wall-mounted cabinet made of electro-galvanized steel finished in red RAL 3000 with polyester resin, in accordance with ISO 9227 corrosion-resistant, door opening more than 170°, wasp-proof ventilation slots and provision for an opening.
- butterfly opening mechanism with provision for a seal.
- Shatterproof panel "INTEGRA" trasparente, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€224.00
- Description
Type 2, Form "C", complete with:
- Wall-mounted cabinet made of electro-galvanized steel finished in red RAL 3000 with polyester resin, in accordance with ISO 9227 corrosion-resistant, door opening more than 170°, wasp-proof ventilation slots and provision for an opening.
- butterfly opening mechanism with provision for a seal.
- Shatterproof panel "INTEGRA" trasparente, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€228.00
- Description
Type "C" form 2, complete with:
- Wall-mounted cabinet made of AISI 304 stainless steel, with a door opening more than 170°, anti-wasp ventilation slots and provision for a hole.
- Butterfly opening device with provision for a seal.
- Shatterproof transparent "INTEGRA" panel, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
€242.00
- Description
Type "C" form 2, complete with:
- Wall-mounted cabinet made of AISI 304 stainless steel, with a door opening more than 170°, anti-wasp ventilation slots and provision for a hole.
- Butterfly opening device with provision for a seal.
- Shatterproof transparent "INTEGRA" panel, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
€258.00
- Description
Type "C" form 2, complete with:
- Wall-mounted cabinet made of AISI 304 stainless steel, with a door opening more than 170°, anti-wasp ventilation slots and provision for a hole.
- Butterfly opening device with provision for a seal.
- Shatterproof transparent "INTEGRA" panel, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
€272.00
- Description
Type "C" form 2, complete with:
- Wall-mounted cabinet made of AISI 304 stainless steel, with a door opening more than 170°, anti-wasp ventilation slots and provision for a hole.
- Butterfly opening device with provision for a seal.
- Shatterproof transparent "INTEGRA" panel, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
€215.00
- Description
Type "C" form 2, complete with:
- Wall-mounted cabinet made of AISI 304 stainless steel, with a door opening more than 170°, anti-wasp ventilation slots and provision for a hole.
- Butterfly opening device with provision for a seal.
- Shatterproof transparent "INTEGRA" panel, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
€240.00
- Description
Type "C" form 2, complete with:
- Wall-mounted cabinet made of AISI 304 stainless steel, with a door opening more than 170°, anti-wasp ventilation slots and provision for a hole.
- Butterfly opening device with provision for a seal.
- Shatterproof transparent "INTEGRA" panel, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
€270.00
- Description
Type "C" form 2, complete with:
- Wall-mounted cabinet made of AISI 304 stainless steel, with a door opening more than 170°, anti-wasp ventilation slots and provision for a hole.
- Butterfly opening device with provision for a seal.
- Shatterproof transparent "INTEGRA" panel, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
€260.00
- Description
Type "C" form 2, complete with:
- Wall-mounted cabinet made of AISI 304 stainless steel, with a door opening more than 170°, anti-wasp ventilation slots and provision for a hole.
- Butterfly opening device with provision for a seal.
- Shatterproof transparent "INTEGRA" panel, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
€228.00
- Description
Type "C" form 2, complete with:
- Wall-mounted cabinet made of AISI 304 stainless steel, with a door opening more than 170°, anti-wasp ventilation slots and provision for a hole.
- Butterfly opening device with provision for a seal.
- Shatterproof transparent "INTEGRA" panel, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
€243.00
- Description
Type "C" form 2, complete with:
- Wall-mounted cabinet made of AISI 304 stainless steel, with a door opening more than 170°, anti-wasp ventilation slots and provision for a hole.
- Butterfly opening device with provision for a seal.
- Shatterproof transparent "INTEGRA" panel, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
€258.00
- Description
Type "C" form 2, complete with:
- Wall-mounted cabinet made of AISI 304 stainless steel, with a door opening more than 170°, anti-wasp ventilation slots and provision for a hole.
- Butterfly opening device with provision for a seal.
- Shatterproof transparent "INTEGRA" panel, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
€273.00
- Description
Type "C" form 2, complete with:
- Wall-mounted cabinet made of AISI 304 stainless steel, with a door opening more than 170°, anti-wasp ventilation slots and provision for a hole.
- Butterfly opening device with provision for a seal.
- Shatterproof transparent "INTEGRA" panel, complete with instructions for use.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Brass DN45 hydrant valve, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, with 1½″ thread compliant with ISO 7-1.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m