Product
Special Airone Talpa DN45 Cabinet for Outdoor Wet Hydrant Networks with Dry Valve
Product description
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Installation instructions. Available in the following versions:
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard cabinet contents
- DN45 flexible hose certified to EN 14540, with UNI 804 aluminium alloy couplings and binding to UNI 7422 using rubber binding sleeves
- Red plastic hose support
- 1 ½″ dry hydrant valve
- Adjustable jet nozzle
- Installation instructions
- CE mark identification code sticker
- Seal
Variants
Select up to four variants to compare their specifications.
€454.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 15 m - Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€469.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 20 m - Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€483.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 25 m - Mistral 12 k72
Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), with adjustable full-jet, spray and shut-off settings.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€500.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 30 m - Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€436.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 15 m - Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€451.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 20 m - Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€468.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 25 m - Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€481.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 30 m - Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€454.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 15 m - Mistral 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€469.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 20 m - Mistral 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€483.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 25 m - Mistral 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€500.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 30 m - Mistral 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€483.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 15 m - Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€500.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 20 m - Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€515.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 25 m - Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€531.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 30 m - Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€468.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 15 m - Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€481.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 20 m - Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€498.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 25 m - Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€513.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 30 m - Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€483.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 15 m - Mistral 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€500.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 20 m - Mistral 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€515.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 25 m - Mistral 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€531.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 30 m - Mistral 13 k85
Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€580.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 15 m - Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€595.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 20 m - Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€612.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 25 m - Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€628.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 30 m - Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€563.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 15 m - Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€579.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 20 m - Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€592.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 25 m - Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€609.00
- Description
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 30 m - Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€580.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h400 panel, AL hose 15 m – Mistral 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€595.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h400 panel, AL hose 20 m – Mistral 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€612.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h400 panel, AL hose 25 m – Mistral 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€628.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h400 panel, AL hose 30 m – Mistral 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€611.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 15 m – Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€626.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 20 m – Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€643.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 25 m – Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€659.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 30 m – Mistral 12 k72
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€592.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 15 m – Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€609.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 20 m – Miami 13 k85
OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:
- Airone DN45 cabinet
- Provision for a hole and anti-wasp ventilation slots
- Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
- Stand available in two heights, 400 mm and 750 mm
- PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
- Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
- AISI 304 stainless steel. Includes standard cabinet contents. Talpa stand, Talpa System, height H = 400 mm / H = 750 mm. Dry pipe and valve, RED RAL 3000, CV2432VE / CV2452VE. H = 750 mm / H = 1200 mm
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Hose support cradle made of red thermoplastic.
- Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€624.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 25 m – Miami 13 k85
Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€640.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 30 m – Miami 13 k85
Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain.
- DN45 Miami nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets
€611.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 15 m – Mistral 13 k85
Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 15 m
- Data sheets
€626.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 20 m – Mistral 13 k85
Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 20 m
- Data sheets
€643.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 25 m – Mistral 13 k85
Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 25 m
- Data sheets
€659.00
- Description
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 30 m – Mistral 13 k85
Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain.
Standard DN45 equipment
- Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves.
- Red thermoplastic hose support cradle.
- Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain.
- DN45 Mistral nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings.
- Installation and operating instructions.
- CE identification and marking label.
- Seal.
- Hose length
- 30 m
- Data sheets